can error

[befaiz]

Hi,

I receive these errors, white someone the correct konfiguratin for CAN NI PXI 8464, I work in a NI PXI as remote system with labview RT  8 and CAN 2.3.2 

Fehler -1074388957 ist bei CAN Initialize.vi aufgetreten

Mögliche Ursachen:

NI-CAN:  (Hex 0xBFF62023) Stellen Sie sicher, dass dem Interface im Measurement and Automation Explorer (MAX) unter 'Geräte und Schnittstellen' ein spezifischer CAN-Port zugeordnet ist.

 thanks.  befaiz

[Norbert_B]

Befaiz,

as far as i understand the error-description and your infos in the posting, you are using a remote PXI-system which is running on RT. I asume that the programming language you are using is LabVIEW.
Within the PXI-system, you have a 8464, which does not work correctly in your RT-application. Due to the error-message, there is some issue with the driver trying to access the 8464. So either the driver is not properly installed on the RT-system or you missed some neccessary settings for the device within the MAX of you hostsystem. Please check these settings.


Norbert B.
NI Germany