In the RLP are some register decriptions missing, INT_ACK_REGISTER

[M.Behn]

it looks like in this register i can confirm an interupt to reset it and wait for the next one?

thanks

mario b.

[Christian_L]

That is correct. Bit 14 (Gi_TC_Interrupt_Ack) on the Gi Interrupt Acknowledge Register is used to clear the Gi Status Register Gi_TC_Status bit, and the TC status interrupt, if it was enabled in the corresponding Gi Interrupt Enable Register. This bit returns to 0, immediately after the write.

Christian L
Systems Engineer
NICS - National Instruments