Looking for the Register Map for NI PCI 6703

[CarrieNL]

At this moment, I am trying to write a noninlined s-function dervice driver for NI PCI 6703 DIO in MATLAB, since MATLAB 7.1 only supports NI PCI 6703 AO.

As far as I know, the PCI-6703 card does not support IO port address but window memory address. So I am looking for the register map everywhere on the Internet, but I can not found any.

Is there anyone can help me out?

P.S. I already post once in the Multifunction DAQ Forums. http://forums.ni.com/ni/board/message?board.id=250&message.id=20076

[Jeremy_C]

Unfortunately, we do not officially support register level programming for the 6703 or 6704 boards, nor do we have a released copy of the register map.  However, if you would be interested in telling me more about your application, feel free e-mail me directly, and I can see if there's anything I can do to help.

Jeremy

jeremy.crawley@ni.com

[alstriker]

CarrrieNL -

I also selected the  6703 as my data card without realizing that the Mathworks didn't support the DIO. Were you successful in writing the sFunction to support this card? If so could you help me out?

-Grant

[CarrieNL]

sorry, i didn''t make it, since there is no RLPM.

[Jeremy_C]

Some simple DDK examples have been created for the 670x boards and are available at the link below.

ftp://ftp.ni.com/support/daq/mhddk/examples/ni670x.zip