Home Community Example Programs Example Code Document

Example Code

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
ASK A QUESTION

DC Power Hardware Timed Pulse Generation

by:
‎12-17-2010 03:12 PM
Last Edited by: Member Example_Scrubber_Guangwei ‎07-08-2017 02:20 AM

Products and Environment

This section reflects the products and operating system used to create the example.

To download NI software, including the products shown below, visit ni.com/downloads.

    Hardware

  • Data Acquisition (DAQ)
  • Modular Instrumentation

    Software

  • LabVIEW

    Driver

  • NI DAQmx

Code and Documents

Attachment

Download All

 

Overview

This example demonstrates how to program a PXI-4132 for hardware-timed sequence generation.

 

Description
The PXI-4132 SMU supports hardware-timed sequence generation and can be configured to source high precision voltages and currents. In this example, the measurement cycle is decoupled from the sourcing process so that there is no additional source delay in the sequence. Note, a PXI-4132 is required to run this example.


Requirements

  1. LabVIEW 2014 (or compatible)
  2. NI-DCPower
  3. NI-DAQmx

Steps to Implement or Execute Code

  1. Unzip the attached folder to your computer
  2. Open the VI "NI CEC Remote Control.vi"
  3. Run the program

 

Additional Information or References
VI Snippet

 1111.png

 

 **This document has been updated to meet the current required format for the NI Code Exchange.**

Sean Ferguson
Application Engineering Specialist | RF and Reconfigurable Test

Example code from the Example Code Exchange in the NI Community is licensed with the MIT license.

0 Kudos