We are having trouble wirelessly connecting our rRIO to our dirver station. We were able to image and format the rRIO using the new USB port, plus we could also run the code through the USB and flash it to the robot. We were also able to set up and configure our router and the IP settings. We are pretty sure we can connect to the router for we see the connection in the computer. The issue is that the moment we disconect the USB, we lose connection. On the driver station diagnostics the DS radio light won't turn on. It suggests that we check power, configuration, and the cabling between the driver station and the router. We've tried all these, but it still won't work. We've tried connecting wirelessly to the router, through ethernet to the router, and we've even tried connecting directly through ethernet to the rRIO. None will work. We think that the issue is in the ethernet port on the rRIO. We would very much appreciate any knowledge regarding this topic.

FIRST Robotics Competition Discussions

I am glad you have figured out the behavior and now everything is working properly. Good luck this season!

Message 11 of 11

(739 Views)