suggest me an acquisition card

[1113215]

Please suggest me an NI acquisition card.my requirments are as follows

PCI based 

sampling rate >200 MSPS

bit resolution = 8 bit atleast

frequency bandwidth  >200 MHZ

input channels, 2-8 

should sample on trigger and in continous mode as well. 

[1113215]

And one thing more i want number of sampling rate options at high sampling rates

i would like to hav at least 10sampling rates  between 100MSPS  to  200MSPS

please suggest an appropriate card

regards

umair

[Wallace_F]

Hello Umair,

Thank you for considering National Instruments for your data acquisition needs.  If I understand you correctly, you would like a data acquisition board that can sample at up to 200 MS/sec with between 2 and 8 input channels with 8 bits of resolution and at least 200 MHz bandwidth.  You would also like a data acquistion board that is capable of performing a continuous acquisition when triggered.  Based on these criteria, I have narrowed down the different PCI based high speed digitizers to three.  They are the PCI-5152, PCI-5153, and the PCI-5154. If linked each digitizer to their respective product pages for your consideration. Also, for more detailed information on all of the NI high speed digitizer offerings, I recommend that you browse the NI High Speed Digitizers Help document which I have also linked for your convenience. While the high speed digitizers mentioned above do not meet all of the requirements you listed; specifically the number of channels, they are the closest matches.

Best wishes,

Wallace F.

[1113215]

thanks for ur suggestions.

 i will go through the specs of these choices and hopefully u wud be available for more queries.

thanking u again.

regards

umair

[Wallace_F]

Hello Umair,

I'm glad that I could be of assistance to you.  If you have any questions about the specifications, just post them to this thread and I will be happy to look into them for you.

Regards,

Wallace F.