After intalling NI-488.2 driver on ARM PC, PC cannot boot due to BSOD.

[semi1212]

Hello.

I tried to use the NI-488.2 driver after installing it on the ARM PC, Problems are occurring.

BSOD is occurring and error code is VSL_INITIALIZATION_FAILED.
Is there any way to solve this problem?

The driver in problem was downloaded from the link below.

NI-488.2 Download - NI

The information of the PC where the problem occurred is as follows.

Model : Samsung Galaxy Book Edge 16

Windows Version : 26100.2314

CPU : Qualcomm Snapdragon X Elite X1E80100

RAM : 16GB

Thank you in advance.

[santo_13]

I don't think NI device drivers work on anything other than x86/x64 architecture.

Related article, should apply for your case too - https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000001DsFACA0&l=en-US