Hello, I am using Labview 2016 and windows 10. I have a problem using a GPIB-USB-2 adapter from ines. I have installed its driver and windows recognises it in the "device administrator". If I try to connect to the GPIB via labview it does not work, and give an error (see screen shot attached). What should I do to let Labview see my GPIB-USB device? Thanks for the help

Dan, Seeing how your device does not respond to "*IDN?\n" try these queries below and see if you get a response from your instrument. NOTE: the \n is the newline character (aka Line feed) and not the two characters "\" and "n". ID?\n If that doesn't garner a response from your instrument, then try U0X\r\n If neither of those gives you a response (error responses do not count here), then your setup probably needs to be reviewed.

Instrument Control (GPIB, Serial, VISA, IVI)

GPIB-USB issue

Solved!

Author

Hi,

Unfortunately I do not have tha manual.

Thanks for the suggestion 🙂

Message 11 of 11

(788 Views)

Instrument Control (GPIB, Serial, VISA, IVI)

GPIB-USB issue

Re: GPIB-USB issue