Help needed using VISA to communicate w/ PCI2PCI Bridge.

[MrV]

Hi,

I am trying to use VISA to communicate with a PCI board that I am developing. The board has a PCI to PCI Bridge (DEC 21150) that then connects to multiple PCI devices on its secondary side. I can see my end secondary PCI bus devices using MAX but I cannot get MAX to recognize my bridge (I need to be able to access the bridges registers for certain applications). Am I doing something incorrect or trying to do something that is not supported?


Thanks,
Mike Vorhies

[pavanb]

refer http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000503C0000&UCATEGORY_0=_200_&UCATEGORY_S=0