Is there a better Manual with a more specific pinout for PCI-8431/4

[carol1]

I need to connect this to a vacuum gauge (GP 390)and am not sure of which pins go to what.  There is no specific manual that I could find.

[Justin_E]

Hello,

Please contact National Instruments Support to obtain this information. You can create a new service request at www.ni.com/ask . Thanks!

[JasonSmith]

If you have NI-Serial installed on your system you can find a Serial Reference Guide in the start menu that describes the pinouts of the connectors. You can also find a copy here: Serial Quick Reference Guide

This includes pinouts for both the 10-pin connector, as well as the 9-pin DB-9 if you are using the NI-supplies cables.

-Jason S.