Instrument Control (GPIB, Serial, VISA, IVI)

cancel
Showing results for 
Search instead for 
Did you mean: 

NI max device cannot be configured by right click

hello, I have a Balsler camera which is connected to PC with USB3.0.I can use it normally on its own software and I can see this device on device manager and the NI MAX devices. But when I right click the camera in NI-MAX, noting respond to me at all and I cannot remame it. 

Can you give me some advices

0 Kudos
Message 1 of 2
(137 Views)

Hi aska16,

 

do you have the option to switch from the basler to the NI-IMAQdx driver, as was done here: Solved: LabVIEW doesn't detect USB 3.0 Basler Cameras - NI Community See the attached image for instructions on how to change the driver.

 

Naturally, this requires the driver to be installed of course. The driver is part of the NI Vision Acquisition Software package, which can be downloaded here: Vision Acquisition Software Download - NI.

 

Let me know if it works for you, or if there are further questions!

 

Best regards

Leonard

0 Kudos
Message 2 of 2
(94 Views)