Dear All,
I am trying to automate some of the oscilloscope measurments using Tektronix DPO 7000 Oscilloscope. This is to measure amplitude/rise time/fall time/time interval etc among the four signals. Each measurement is closely related to other signals (like what is the amplitude of the signal2 and signal3 during the specified time interval of signal 1). I checked the available PnP drivers &examples (project style VIs) provided by Tektronix. I noticed that some of the functions are not working correctly (like time/div, setting the cursor etc) as discussed in the thread. I need suggestions in the following concerns.
-
Can we use LabVIEW signal express Tektronix edition for this type of relative measurments.
-
or can we achieve the required measurment function with the available set of project style VIs
-
or do we need to use the DPO 7000 programmers manual to frame the GPIB commands and perform the required functions.
Out of three options which is best for my measurment especially in terms of development time. Please add your inputs.
Thanks in advance
