LabVIEW
2x USRP TX/TR
Hello guys, Iam working on my bachelor thesis and i came upon some problems. I got 2x USRPs connected to each other one into RX and other into TX and Oscilloscope that is connected into Channel1, i use many modulations (FSK modulation shown in the picture below), it sends the modulated signal to the oscilloscope, but idk how to get info from the other USRP back so i can take and demodulate it, same for OOK modulation shown in the second picture, i tried many things but everytime it shows nothing on the graph, where could be the problem or how could be the demodulation made so it works ? I use NI/USRP toolkit or w/e the name is. Thx for answers 🙂
Hello, as per my last post, iam working on my bachelor thesis and need help urgently. Iam using 2x USRP, one connected into RF1(Tx)(Transitter) and the second one into RF2(Rx)(Receiver)-3rd picture the top one, and i still cant show the transmitted signal back into the LabView (2nd picture diagram of demodulation). The modulating one is working(1st picture), its showing modulated signal on the oscilloscope connected into the Rx/Tx, is it possible to visuealise demodulated signal from this transmission ? Both USRPs are connected into the computer via ethernet cable and got different IP adresses. Is there any other problem in our diagrams ?
