Hello, I hope sombody can help me with my problem. I have created an application with the Application-Builder. The app is working and communicates with the hardware, but only on the PC, on which Labview is installed. On other PCs, the app is running, but don't communicate with the hardware. I have installed all drivers and I can commuicate with the hardware by using the Meassurement and Automation explorer. I have installed the drivers with the NI-DVD. I have tried diffrent ways to install the runtime-engine and the drivers, but nothing worked. Thanks a lot for your help. best regards Florian

Since you where able to control your Hardware Devices with MAX, my first guess would be that Hardware / Channel Descriptors used in the Application are not correct. I suggest using Controls instead of Constants for Channel Selection.

LabVIEW

Application builder

Solved!

Author

Thanks for yout help, now i can communicate with the HW. The problem was the configuration of the HW in MAX.

THX @ all

Message 11 of 11

(279 Views)

LabVIEW

Application builder

Re: Application builder