The USB-6229 has four analog outputs and would meet your
requirement of outputting four waveforms.
As mentioned in previous posts, without more information about the
timing requirements it is difficult to say if the USB-6229 will meet your
needs. Take a look at the examples that
have been referenced in previous posts.
If you open LabVIEW and go to Help >> Find Examples
you can access the Example Finder. In
the lower left corner you can select a hardware device like the USB-6229 (in
drop down menu select Add Device) and find only examples that will work with
that device by selecting “Limit results to hardware.” This will show you many of the hardware
examples that will work with that device.
Many of the examples mentioned in previous posts will also work. Most likely you can piece together your
custom program by looking at several different kind of examples.
Jared T.
