Howdy! I have a question regarding a nagging problem that we've been having lately with our LabVIEW RT Application and sbRIO-9651 SOM controllers. I'm trying to run the top-level RT VI for our application from the project explorer window. When I do that, LabVIEW begins to deploy all of the VI's within the application but at the very end of the deployment there is a message that states "Deployment completed with errors" as you can see in the attached screenshot. Then the board restarts and I lose connection. I have gone through the list of deployed VI's and do not see any VI's that are broken or have been deployed with an error. The only indication of an error in the deployment is at the end of the deployment I tried running a simple example program on the RIO called sbRIO-9651 Read On-Board Temperatures. The RT code for this example project has an enable/disable diagram structure surrounding the FPGA interface reference section of the code. I was able to duplicate the error when this section of code was enabled. However, when this section of code was disabled and only the RT code was run on the controller (no FPGA interface) the code was able to deploy and run successfully. The additional attached screenshots show this as well. We have 2 custom carrier cards that two separate SOM boards are docked on. This problem has occurred on both of these systems. We also have a third SOM with the NI Reference Carrier Card in-house. I've also swapped out the SOM from the reference carrier card with the SOM on our custom board and the error persists. I've also used 2 different development laptops to try and deploy the code and the error persists. The only way I'm able to run the top-level RT VI on the SOM and custom board is when the FPGA interface VI's are disabled. However, the VI's run with no problem on the NI Reference Carrier Card (FPGA Reference VI's enabled). We're running: Windows 10 LabVIEW 2017 SP1 NI CompactRIO 17.0 on the SOMs I'm communicating with the SOM's via the USB connection. Any help would be sincerely appreciated. Thank you, Alex

Hey Alex, If the VIs work on the Carrier Card and not on the custom board, then there's going to be something specific to the custom board that's causing issues. Regarding the interactive mode VIs, I apologize for not quite understanding your point. If an FPGA VI runs, that says to me that it's working properly. Are you saying that if you only run the FPGA VI directly for the custom board, it works? How are you running the FPGA VI when you're trying to start the project - does the RT VI call it and tell it to run? Bdog

LabVIEW

Deployment Completed with Errors on sbRIO-9651 using LabVIEW 2017 SP1

Solved!

Hi Alex,

Thanks for the help and the double check with R&D, appreciated it. If any more problems occurs we'll contact our third-party provider

Message 21 of 21

(339 Views)

LabVIEW

Deployment Completed with Errors on sbRIO-9651 using LabVIEW 2017 SP1

Re: Deployment Completed with Errors on sbRIO-9651 using LabVIEW 2017 SP1