HI, I have a NI USB 6008 data aquisition card. Firtsly I used the card with a Windows 7 64 bit computer system. After I installed Labview 2016 (64bit version) I installed the NI-DAQmx 9.9 package and everything worked like a charm (the driver for my NI USB 6008 card was properly installed and it is perfectly operational). The problem I have started when I tried to install the NI USB 6008 card on a Windows XP 32 bit. I installed the 32 bit version of LabView 2013 and after that I installed the NI-DAQmx 9.9 package. This time the driver for that card was not installed. I tried to instal the same packages on a Windows 7 32 bit version system but the required driver wasn't installed. In both cases windows detects the card and tries to find the necessary drivers for it. I read the user manual of that card and it sais that it should work on 32 bit Windows 7 and XP and even on Windows 2000. The same compatibility I found also for NI-DAQmx 9.9 package. So, what do you trink I could try to get my beloved card driver ? Regards, Ciprian

LabVIEW

Also, make sure you are plugging directly in to the USB port on the computer, not to an external hub.

--------------------------------------

Message 11 of 11

(949 Views)