I am looking for a toolkit to use a CanOpen device!!

[schmitt]

I would like to communicate with a canopen network device and use Labview.So, I am looking for information which explain me how I can do this.

[craigherdman]

schmitt,

At this time there are no CANopen VIs available from National Instruments. It is likely possible, with a very good understanding of the CANopen protocol, to write your own. The following tutorial hints at the possiblity:

http://zone.ni.com/devzone/conceptd.nsf/webmain/7a542c58102774db8625680700606293?OpenDocument

It may be wise to conduct an internet search to see if any third-party companies have released anything.

Craig H.
NI Applications Engineering

[craigherdman]

schmitt,

The following discussion post contains some information that you may find useful:

http://exchange.ni.com/servlet/ProcessRequest?ECategory=LabVIEW.LabVIEW+General&HOID=506500000008000000734A0000&RHIVEID=101&RNAME=ViewQuestion

Craig H.
NI Applications Engineering

[schmitt]

Thanks for your Help!!!

eric SCHMITT