MAX shows my TCP/IP Interface, but no communication's with Labview

[e.gtoto88]

thanks for you all  

i tried all your answers but i found a strange response as :

-i tried the same way and code to another instrument and it workes well 

-and i tried my tegam 1830a with another program called < fluke metcal > and it works well with it

*** so what could be the problem ???????????????????????????????????

[Dennis_Knutson]

Where are the answers to my basic questions? One additional question is what is the IP of your pc?

[e.gtoto88]

i'm sorry not answering your quastions......

but , i did all you mentioned in your first post more than one time and for more than one instrument and no error faced me for these steps 

my pc ip is    " 62.117.58.134"

[e.gtoto88]

i'm sorry not answering your quastions......

but , i did all you mentioned in your first post more than one time and for more than one instrument and no error faced me for these steps 

my pc ipp is    " 62.117.58.134"

[Dennis_Knutson]

You still have not answered my questions and I have read your posts. Please assign an IP on the same subnet and connect the instrument directly to the pc as a test. Verify that the instrument is not configured for DNS.

[e.gtoto88]

thanks for your reply again .......................

i did  your steps and the instrument didn't recognised for  DNS