Hi everyone, I try for the first time to communicate with a Joy-It DPS 5005 power supply with Modbus RTU. But somehow I am missing something and fail. Therefore I would like to ask for your help. The device requires the address code (1 byte), the function code (1 byte), the register starting address (2 bytes), the number of registers to read (2 bytes) and the CRC checksum (2 bytes) The device address is 10. I want to read a holding register. So the function code should be 3. The register starting address is 0 and I want to read 2 bytes. The CRC checksum of 0A 03 00 00 00 02 is C5 70. My first trial was simply using Visa write and send the string 0A0300000002C570 followed by Visa Read. But I always got timeouts and no answer. Then I thought of using the Modbus API library, created a Modbus instance as new serial slave and then used the Read Holding Registers VI. This didn't work, either. Is it because of the CRC checksum? I don't know how to send it I would appreciate every help.

LabVIEW

Modbus RTU over RS485 with CRC16

Well, not the source code of the manufacturer, just a program to control your devices, so you can use a serial sniffer to catch the messages.
And have you tried to change the Termination Character to 0xD (ascii 13)? Send End on Read and Writes?

Message 11 of 11

(74 Views)

LabVIEW

Modbus RTU over RS485 with CRC16

Re: Modbus RTU over RS485 with CRC16