NI DAQ card/USB for Polytec OFV 2700

[Koye88]

Any ideas on whcih NI digital acquisition card/USB will work for a laser vibrometer, Polytec GmbH OFV 302 Sensor Head controlled by a POLYTEC OFV 2700 ULTRASONICS VIBROMETER CONTROLLER?

[chrisger]

Hi there

1. Take a look at the data sheet of the controller to find the maximum voltage range and the maximum signal rate  

2. Go to the NI Hardware selector http://sine.ni.com/nifn/cds/view/main/p/lang/en/nid/1036/ap/daq

These are the hits for

- Voltage acquisition at 100kS/s, 16Bit, USB

http://sine.ni.com/nifn/cds/view/main/p/sn/n1:7690,n13:7374,n2:7563,n21:41,n24:USB,n36:19/lang/en/ni...

3. Select the hit that adapts to the requirements from the data sheet.

[Rico P]

Duplicate forum. Please refer to http://forums.ni.com/ni/board/message?board.id=240&message.id=8267