PCI-GPIB Mac OSX.4 G5

[raman_epfl]

Running Labview 8.2 on MacOS X.4 with the latest PCI/X-GPIB card to a Spex / Jobin-Yvon monocromator. The interface handshake fails on first character sent to the device (TIMO). Using an older PCI-GPIB card (physically larger, I don't see how to differentiate between cards) with G4 MacOS X.4, this handshake is no problem. I admit the Spex interface probably hasn't been changed in 15 years!! Other devices (newer) on the same bus communicate reliably with this latest PCI-GPIB/ OSX.4
Robin

[Philipp R.]

Dear raman_epfl

You could try troubleshooting the communication problem following the
hints on


http://digital.ni.com/public.nsf/allkb/9C9DBA7A3A56B6B686256F4A006FC8DA.

Best regards

Philipp R.