USB Communication with Cygnal Kit C8051F320-TB

[Ishant Dave]

Hi i am using Cygnal development kit C8051F320 - TB.

I want to communicate it with LabVIEW.

Some members in discussion forum earlier have posted queries regarding communication with LabVIEW to USBExpress development kit from Cygnal.

My question is, " is it possible to use same DLL (sif32xusb.dll) supplied with USBExpress with this kit ? " .

If anybody has tried then please send me vi along with firmware.

Thanking you

Ishant

[Xaq]

Hello Ishant,

Based in the excerpt from the USBXpress programming guide, you should be able to:

"The Silicon Laboratories USBXpress Development Kit provides a complete host and device software solution for
interfacing Silicon Laboratories C8051F32x microcontrollers to the Universal Serial Bus (USB). No USB protocol or
host device driver expertise is required. Instead, a simple, high-level Application Program Interface (API) for both
the host software and device firmware is used to provide complete USB connectivity."

It looks like aa1982 got it working on this post:
usb communication with silicon lab c8051f320

And both are using the C8051F32x series controllers, you may want to get in contact with the owner of that thread to see if he encountered any problems.

Xaq