VB code to control PCI-DIO-96

[hork]

I've the PCI-DIO-96 card and would like to control with VB code.

Is this possible?

Please advise.

[tst]

You should repost this to the Measurement Studio board.

[AlanArmstead]

Hello hork,

Your device is supported by NI-DAQmx and Traditional NI-DAQ.  Either of which can be used with VB6.  I would recommend using NI-DAQmx, the next generation data acquisition driver from National Instruments.  Here is a KB that describes how to use NI-DAQmx with VB6.  Hope this helps!

-Alan A.

[hork]

Hi Alan,

Thank you very much for your recommendation.

The problem was solved.

Best Regards

Hork

[AlanArmstead]

Glad I could help.  Best of luck with your project:)
-Alan A.

[willis]

Hi, Hork

I had same problem for PCI-NI-DIO-96. I used only VB6 without Measurements Studio.

I know you already solved this problem. So, I visited NI sites but I don't know what file is downloading.

There are so many files.

Please infrom me how can you solve this problem and downloading files.

[AlanArmstead]

You need to download the most recent version of NI-DAQmx for Windows from this site:  Multifunction DAQ.
Then check out this KB:  NI-DAQmx Support in Visual Basic 6.0.
-Alan A.

[willis]

Hi Alan

Thanks for your email.

I can solve it.

Have a nice day!

[hork]

Hi Willis,

I've solved this problem by made the Dll with LabWindows and then the VB6 is call that dll.

Regards

Hork