I am attempting to control an agilent 8453 uv/vis spectrophotometer via LabVIEW. I am using labVIEW 2013, and the driver available here. I installed NI VISA 5.4. When I attempt to run the AG8453 SimpleMeasurementExample.vi I get a VISA error: %%%%% Error -1073807202 occurred at VISA Open in AG8453 Initialize.vi->AG8453 Simple Measurement Example.vi Possible reason(s): LabVIEW: (Hex 0xBFFF009E) VISA or a code library required by VISA could not be located or loaded. This is usually due to a required driver not being installed on the system. VISA: (Hex 0xBFFF009E) A code library required by VISA could not be located or loaded. %%%%% I have confirmed that VISA is installed (via NI MAX) and that there are no errors in MAX. I am running Windows 7, an intel core 2 duo. Any advice would be greatly appreciated!

LabVIEW

ag8453

That document says future use for rs-232.

You'll probably need to purchase the gpib or lan interface. Your questions really need to be addressed to agilent at this point.

p.s. You still need to find the programming manual.

Message 11 of 11

(375 Views)

LabVIEW

ag8453

Re: ag8453