taking fft of a 500 Hz sine wave signal

[Oli Oli Oxin Free]

Hi i really need you VI for fft to get the same image as the jpg file you handed. I really appreciate it if you could post it. I have a project that i'm using the fft for.

Thanks in advance

[Coq_Rouge]

Dear Oli Oli Oxin Free, cp617, dyi

Please take some time and browse trough your examples. Labview has always been shipped with a lot of FFT examples. I have not been using 6.1 for a long time now. But I am quite sure the "example finder" was included in this version. You will find it under the help in the toolbar. But please remember that the FFT functions are not part of the base version.

[Coq_Rouge]

I am in a good mood today.

Take a look at this. It is part of a job i did in many years ago. I have to fix it up and remove some parts. I guess it need some work, but it should work. It is in 6.1. I used 7.0 to open it, and saved it as 6.1.

Also take a look at this http://zone.ni.com/devzone/cda/tut/p/id/4278

Message Edited by t06afre on 02-04-2009 11:21 AM