windows xp problem with pci 8255

[DIESEL62]

Hello

I have a chassis dyno that is controlled by a pci 8255 board.(decision computers pci board) the computer is running windows 2000 .All works fine but I wanted to upgrade computer .

I have changed to windows xp. changed the data acquisition card to the new computer.

The problem I have is the input channels now appear to have changed and are giving me incorrect readings

Can anyone shed some light on my problem

Thanks

[Christian Mergl]

Hm, you are talking about "Input channels and wrong readings". But, as far as I know - and I do know - the 8255 is a Image Acquisition Board.

So what exactly are thoose wrong readings?

Christian

[DIESEL62]

Thanks Christian

Decision computers card  part #DCI98120406 .   

The problem is when I run the dyno programme . The logged channels are mixed up . What I mean by that is the air temp will come out on the Lambda channel etc.

The programme will run ok just the channels seam to be confused .

If I put the card back into the old computer everything works fine again. ?

Thanks

[Dennis_Knutson]

If you are using a 3rd party board, I'm not sure at all why you posted the question here. It sounds like the problem that you need to ask Decision Computer.

[DIESEL62]

Sorry if I am posting in the wrong forum and about aftermarket boards.

I purchased the system as it is ,I havent built it.It apparantly runs labview as a base.

I have also asked the manufacturer of the boards and the manufacturer of the dyno system the same questions .

It was a generic question really

What would cause the system to change an input channel .ie: the air tempreture is showing on the Lambda channel etc.

All I have done is changed it to a windows xp platform.

Once again I am sorry if it is a silly question but I thought someone might have had a similar problem and could shed some light on it.

Thanks.