replace pci DAQ with usb one

[VR]

hail

i need to repalce a PCI-6035e with a USB DAQ. I need to know if there is a possibilty to do so, without chainging the VB6 code we are using to controll our system.

THANKS

       VR

[AlessioD]

If your code was developed using DAQmx Functions in VB, then you have good chances.

Otherwise, there is no way for you to move your Traditional NI-DAQ code over to a USB device since these devices are only supported under DAQmx.

Regards

AlessioD