I have connected USB 6008 to my accelerometer sensor which is used as external sensor to motor. Before, connecting to the labview I have checked in CRO that gives 0.5mV to 1.2V linear to acceleration from motor. I have connected this to AI0 channel as differential analog input and I placed DAQ Assistance select AI0 as input to the DAQ.
Problems are
1) I had selected Acceleration option in Software which shows error that " there is no support devices found ".
2) So, i had selected voltage option and continued with AI0 channel which looks like acquire the signal from DAQ but it is 0.1 or 0.2 volts or less and always constant.
I don't know how can I acquire this signal. Some one suggest me the good way.
