Hi.. I am trying to get a motor working.. I have a NI UMI-7772 motion interface (http://sine.ni.com/nips/cds/view/p/lang/en/nid/12534), controlling two PS P70530-SDN (http://www.danahermotion.com/products/product_detail.php?parent_id=549
) drives with each a T21NRLH-LDN-NS-00 stepper motor.. But i can't seem to get it to work.. I've tried almost every possible setting in Measurement and Automation Explorer, and the program seems to think the motor is moving, but nothing happens.. At best the motor is holding the axis, so that you can harddly move it manually.. The drive has a number of preconfigured motors, that should work (http://img526.imageshack.us/my.php?image=drivesbb7.jpg) but the drive I have is'nt on that list.. According to the manual I need a cable (P7S2-232-9D) to configure the drive from a computer.. The problem is, that I'm short on time and don't have that cable.. So is there any of the other motorsettings that could work with this drive, or do any of you have any other suggestions..
Best regards
Mark Herskind
