Controlling a MTS 243.35 Actuator using a 407 servo controller and a PXI-6251 card and Labview

[DapKraKen]

Regards,

I am trying to settup an MTS actuator model 243.35 using a the 407 controller to do a displacement controlled test. I am new to Labview and the NI System and would appreciate some guidance or examples to get started configurating the system. I am using Labview 8.6 and a PXI-6251 card with a SCB-68 terminal block.

Bests

[DapKraKen]

Regards,

I am trying to settup an MTS actuator model 243.35 using a the 407 controller to do a displacement controlled test. I am new to Labview and the NI System and would appreciate some guidance or examples to get started configurating the system. I am using Labview 8.6 and a PXI-6251 card with a SCB-68 terminal block.

Bests

[DapKraKen]

Regards,

I am trying to settup an MTS actuator model 243.35 using a the 407 controller to do a displacement controlled test. I am new to Labview and the NI System and would appreciate some guidance or examples to get started configurating the system. I am using Labview 8.6 and a PXI-6251 card with a SCB-68 terminal block.

Bests

[Sarah_Y]

This post is a duplicate.  Please see link below for original thread.

http://forums.ni.com/t5/Multifunction-DAQ/407-controller/td-p/1606662