Hi,
I am recording analog force platform signal (AMTI; 6 analog inputs; AI0,AI1,AI2,AI8,AI9,AI10) and simultaneously sending analog output (electrical signal of 4mA and frequency band between 0-20Hz; AI0). The DAQ I use is PCIe-6343. The analog input channels are set to "SE" and the analog output to "NRSE". The BNC is not setup in a metal rack. It seems that when I output the electrical signal, the analog input captures the signal (I get exact same frequency content, even when no one of force platform and the amplifier is turned OFF). What are my options to reduce this cross-talk?
I am new to this so if anymore informations are necessary, don't hesitate.
Thanks in advance!
