DAQ assistant not opening in vi

[Plumbob]

Hi,

I am using a NI 6008 DAQ to make a measurement as part of a test. I placed the DAQ Assistant in the VI using express vi, DAQ assistant. When I run the VI, the DAQ assistant doesn't seem to run, or  initialize the daq to the settings I have stored. If I manually open the DAQ assistant sub vi and run it, then close it, the vi works fine every time after that. This seems to be a problem whenever the PC is rebooted, or if the usb port is disconnected then reconnected. Not sure why the DAQ Assistant isn't running inside the VI.

Thanks,

Bob

[Plumbob]

Problem solved, I didn't have the data input wired on the DAQ assistant that sets up the digital output port.

Bob