Hi, Ni Community! I was just looking for some help in getting my NI AT-MIO-16 daq card. As far as I understand right now (still learning quite a bit), there is very little info or driver software available out there for this DAQ card. Does any know if I need the driver to get this card to function? If so, where I can get it? I've tried as far back as NI-DAQ 4.8.5 but could not find the AT-MIO-16 driver when trying to add the hardware. Is there something I should have known when trying to install this specific card? For added info, I am trying to install the card into an old system that supports ISA and runs windows 95. I've tried installing it several times, I've had a lot of success with the AT-MIO-16E-10, but none with the AT-MIO-16. Any sort of help or advice on what to do to get this card functioning is greatly appreciated. Cheers, Stephen Abraham

I think this manual can help: https://www.ni.com/docs/en-US/bundle/320476/resource/320476.pdf You need to also check which version of the AT-MIO-16 you have: http://digital.ni.com/public.nsf/allkb/0F3C3E14C060DFF08625661E0057DD2D?OpenDocument If you post it here, I can find the corresponding driver.

Multifunction DAQ

Driver/Setup for at-mio-16 (not 16E, 16X, etc)

Solved!

The oldest version you can download is 7.1.

If you need anything older you need to contact NI support directly.

Message 11 of 11

(486 Views)

Multifunction DAQ

Driver/Setup for at-mio-16 (not 16E, 16X, etc)

Re: Driver/Setup for at-mio-16 (not 16E, 16X, etc)