NI USB 6009 OEM - USB Loader firmware

[Loopin3]

I have a problem with my 6009 OEM, the device work fine with win10 and daqmx 16.0.1.... 

When im try to use the device with a Windows XP pc and a old daqmx, the driver of device appear as USB Firmware Loader.. 

After that the device dosent work in both system , win10 and Winxp, how i can resolve it? 

Thanks in advance

[alamanna]

Hi,
searching for the keywords of your issue, I found some resources:

• USB Device Firmware Incompatible with DAQmx Base 3.0 or Later
• DAQ Device Shows up as USB Flash Firmware Loader in Device Manager
• Archived:Using a USB-6008 / 6009 / 6501 in MAX, and Switching Firmware Between NI-DAQmx and NI-DAQmx...
• USB-6210 is loaded as Firmware Loader instead of correct device
• NI USB-6212 is not detected on the USB bus.

Hope this helps!
Regards,
Alessia