Problem in Linux with exsample programm

[Mario Behn]

Hi,

I use the measurement hardware device driver under linux for the NI 6602
counter / timer card.

there are some sample coming with it.

i can't compile the programm no. 8 (gpct_ex8.cpp), but all other without any
problems.

So the error messages are that there some DMA member function not in the
tTio.

So are they not implimented yet in the linux version?
So that there is not DMA or interupt support in it?

Thanks

Mario Behn

[JustinBritten]

Mario,

Open Source drivers for our DAQ products are developed by the Comedi project. It should be noted that these drivers may not contain the full functionality of the NI-DAQ driver available for E Series devices under the various Windows and Mac operating systems.

For information regarding the Comedi Project please see http://stm.lbl.gov/comedi. Support for the Comedi drivers is available through the Comedi mailing list. Please contact the Comedi mailing list for questions regarding this Open Source driver.

For more information on National Instruments Measurement and Automation products for linux, see http://www.ni.com/linux.

Regards,
Justin Britten

Applications Engineer
National Instruments