accidentally uninstalled NI-DAQmx, now I can´t see DAQs in MAX

[Xtreme]

Hey,

I accidentally.. uninstalled NI-DAQmx 7.4 and after that installed NI-DAQmx 7.5. Now I found that in MAX - NI-DAQmx devices I can see my 6225 DAQs but in front of them the picture is not "normal". In picture there is red "x" and in attributes serial number etc. are valued N/A.

Do I need to uninstall NI-DAQmx and remove PCI- cards and install after that first software and after that DAQs or is there a better way to configure DAQs?

Thanx

[sami123]

Do the following

verify that windows sees the board from device manager

press F5 to refresh the MAX

check if you see the device under tradiotinal daq

IF you see under NI-DAQmx devices two devices ("real" and one with red X)

-> right click the device with red X and select delete

If that cannot help, you can try to remove the board and start the machine without the board -> go to MAX and delete the board you see

install the board and everything should be ok.

if

[sami123]

Do the following

verify that windows sees the board from device manager

press F5 to refresh the MAX

check if you see the device under tradiotinal daq

IF you see under NI-DAQmx devices two devices ("real" and one with red X)

-> right click the device with red X and select delete

If that cannot help, you can try to remove the board and start the machine without the board -> go to MAX and delete the board you see

install the board and everything should be ok.

if above

[sami123]

Do the following

verify that windows sees the board from device manager

press F5 to refresh the MAX

check if you see the device under tradiotinal daq

IF you see under NI-DAQmx devices two devices ("real" and one with red X)

-> right click the device with red X and select delete

If that cannot help, you can try to remove the board and start the machine without the board -> go to MAX and delete the board you see

install the board and everything should be ok.

if above step

[sami123]

Message Edited by so/fin on 08-24-2005 01:12 AM