測量

[apu]

大家好:我使用IMAQ Clamp Horizontal Max來量測某一個位置的距離,裡面的Rectangle參數一開始建立時預設值都為0,設定完我要的參數值之後也都沒有問題.程式關掉前也都有存檔.可是我把程式關掉重開以後,會把我原來設定的參數值又變回原來的預設值0.不知道如何才能每次開啟程式都是我的設定值呢??謝謝幫忙

[zenith]

在參數值的地方按右鍵>>Data Operations>>Make Current Value Default

然後再存檔...

[apu]

謝謝幫忙~OK了^^

[ian_fung]

Dear apu,

Perhaps... Zenith shouldn't get just a star for his advise to you.

[zenith]

Why? Do you have any better suggestions?

由 zenith 在 04-27-2007 02:06 AM 上編輯的訊息

[ian_fung]

Don't you understand what I meant?

I mean you, zenith, should get more than just a star!

Let's close this topic after this 😉

Cheers!