Interchange DIN 96p connector (SH96-96-2)

[Bram1]

We will be using the PXIe 4302 with the 96p DIN connector. Unfortunately that connector is too big for our end application.

Are there other cables available, besides the SH96-96-2 with a different end connector?

Or is it possible to remove the male connector and attach a different on to the SH96-96-2?

Or is there a PXIe 4302 variant without a backplane connector on the front?

Kind regards,

Bram

[santo_13]

You need to create your own breakout cable into custom connectors, currently NI expects you to use a 96-pin to terminal breakout board or incorporate the 96-pin connector into your test fixture.

You can use a breakout board to form another custom cable combination.

https://www.winford.com/products/brkn4296.php

How many of the 96-pin do you need to route to your application?

[Bram1]

Could you tell me if the DIN 96p has crimp or solder contacts?

[santo_13]

---

@Bram1 wrote:

Could you tell me if the DIN 96p has crimp or solder contacts?

---

If you're asking the construction of the male-female cable, from the looks of it, it may be wires soldered to the connector through a PCB under the case.

I/O connector
Male ..........................................................96-pin Type R DIN 41612/IEC 60603-2
Female.......................................................96-pin Type C DIN 41612/IEC 60603-2