PXI

cancel
Showing results for 
Search instead for 
Did you mean: 

PXI-7831R dip switches, what are they for?

If looking at the PXI-7831R board from the front (vhdci connector end), on the right side there is a 3 dip-switch bank on the PCB along the bottom edge about 2/3 the way back. All 3 switches were set to the OFF position (up) by the factory.

What are the switches for?


Thanks in advance,
-Joe
=========================
0 Kudos
Message 1 of 4
(3,604 Views)
Hi Joe

Please refer to page 2-21 of the NI 7831R User manual:

http://www.ni.com/pdf/manuals/370489b.pdf


Russell G.
0 Kudos
Message 2 of 4
(3,597 Views)
Thanks Russell.
Switch 1 is for loading from flash memory.

Should I assume that switches 2 and 3 are non-functional?

-Joe
=========================
0 Kudos
Message 3 of 4
(3,595 Views)
Hi Joe

I apologize. I missed this KnowledgeBase on the first response.

Russell G.
0 Kudos
Message 4 of 4
(3,587 Views)