I am trying to develop a package to continuously monitor temperatures at several data points on aircraft during flight. I am using a cRIO chassis and a few dozen thermocouples to log temperature data to a .TDMS file saved on the cRIO. I have developed labview code to take data from each of the thermocouples and log it to the cRIO's memory, but I am coming to a roadblock with making the process headless so that it can run in flight. Does anyone know a good starting point to find information on how to use the cRIO in a headless architecture?

D Gabbert, Here are some good starting guides: http://digital.ni.com/public.nsf/allkb/86936A249D18000186256FBF0075E95D?OpenDocument https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000YHpnCAG&l=en-US https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000P6xZSAS&l=en-US Also be sure to check related links, but essentially it sounds like you want to run it as a start up exe: https://www.ni.com/docs/en-US/bundle/labview-real-time-module/page/debugging-a-stand-alone-real-time-application-real-time-module.html I think that should get you going 🙂

Real-Time Measurement and Control

Headless architecture for cRIO temperature recording

Solved!

Thanks a lot Patrick.

Message 11 of 11

(737 Views)

Real-Time Measurement and Control

Headless architecture for cRIO temperature recording

Re: Headless architecture for cRIO temperature recording