Hi, I have to develop/program an organ bath system - a feedback system mimicking real sinusoidal breathing oscillations (shown in attached images). I have NI Labview 8.5, NI-Motion 7.6, a linear motor (M-235 DC-Mike actuator), an MID-7654 Servo Power Motor Drive and a pressure transducer. I believe I will need to control the PID controller and am aware of the PID Control Toolkit as well as the Control Design and Simulation Toolkit for NI Labview. However, is it possible to control the system using the NI-Motion software I have at the moment? If not, do I have to purchase both the PID and Control/Simulation Toolkit or just one? Thanks in advance...
