Hi ,
thank you for your reply; Currently I only boot from internal memory.
I don't have a USB key with a vxworks boot; and for the MPC8347 processor that equips the cRIO9022;
I tried all the flags to boot but without success.
[cRIO-9022 Boot]: ?
? - print this list
@ - boot (load and go)
p - print boot params
c - change boot params
l - load boot file
g adrs - go to adrs
d adrs[,n] - display memory
m adrs - modify memory
f adrs, nbytes, value - fill memory
t adrs, adrs, nbytes - copy memory
r - reset boot line to default
s - boot to safe mode from ROM
u - boot from USB
T iterations, mode - test memory
R - show results of last memory test
e - print fatal exception
v - print boot logo with version
n netif - print network interface device address
$dev(0,procnum)host:/file h=# e=# b=# g=# u=usr [pw=passwd] f=#
tn=targetname s=script o=other
boot device: usbms file name: /bd0/vxWorks
Boot flags:
0x02 - load local system symbols
0x04 - don't autoboot
0x08 - quick autoboot (no countdown)
0x20 - disable login security
0x40 - use dhcp to get boot parameters
Other flags:
0x1000 - disable vx_exec autoboot
0x4000 - enable USB autoboot
available boot devices:
Enhanced Network Devices
mottsec0 mottsec1 usbms
I als tried to boot with the "u" option but without success because I don't have a vxworks binary on a usb key
I also tried to boot with the "u" option but without success because I don't have a vxworks binary on a usb key
[cRIO-9022 Boot]: e
machine check
Exception next instruction address: 0x000101e4
Machine Status Register: 0x00041000
Condition Register: 0x24000482
Task: 0 "(null)"
[cRIO-9022 Boot]: r
The Safe Mode DIP switch must be on to alter the boot ROM flash contents
NOTE: Bootline not saved to NVRAM
[cRIO-9022 Boot]: r
Boot line restored to factory default.
[cRIO-9022 Boot]: p
boot device : usbms
unit number : 0
processor number : 0
host name : lvrt
file name : /c/ni-rt/system/vxWorks
flags (f) : 0x8
[cRIO-9022 Boot]: u
Attaching to USB disk device...
USB mass storage firmware version: 1.0.0f2
Using SST NANDrive
Reliance File System Driver
Datalight Reliance v3.2.2 Build 1376BV
VxWorks Edition for ppc603
Copyright (c) 2003-2008 Datalight, Inc. All Rights Reserved Worldwide.
USB disk /u not detected after 5 seconds
Bus 0
Hub with 2 ports at address 1 on port 0
Vendor: 0x0000
Product: 0x0000
BCD: 0x0000
Class: 0x09
Subclass: 0x00
Protocol: 0x00
Hub with 2 ports at address 2 on port 0
Vendor: 0x0424
Product: 0x2512
BCD: 0x0000
Class: 0x09
Subclass: 0x00
Protocol: 0x00
Device at address 3 on port 0
Vendor: 0x3923
Product: 0x73D2
BCD: 0x0100
Class: 0x08
Subclass: 0x06
Protocol: 0x50
Hub with 2 ports at address 4 on port 1
Vendor: 0x0424
Product: 0x2512
BCD: 0x0000
Class: 0x09
Subclass: 0x00
Protocol: 0x00
Device at address 5 on port 0
Vendor: 0x058F
Product: 0x6387
BCD: 0x0104
Class: 0x08
Subclass: 0x06
Protocol: 0x50
No device on port 1
No device on port 1
Loading /u/ni-rt/system/vxWorks...
Cannot open "/u/ni-rt/system/vxWorks".
