Student Projects
Overview of myDyno
The myDyno for NI myDAQ is a plant allowing student to investigate the fundamentals of motion control. A dynamometer or "dyno" for short, is a device for measuring force, moment of force (torque), or power. For example, the power produced by an engine, motor or other rotating prime mover can be calculated by simultaneously measuring torque and rotational speed (RPM). The system includes an RC car and a roller to measure the speed and power of the car.
What is NI myDAQ?
NI myDAQ is a low-cost portable instrumentation and data acquisition (DAQ) platform that gives students the ability to measure and analyze live signals on a computer. The hardware includes eight software instruments based on
NI LabVIEW system design software to control the NI myDAQ device, providing the functionality of a suite of common laboratory instruments, including a digital multimeter (DMM), oscilloscope, and function generator. Students can access all the ready-to-run software instruments to perform experiments and exercises. When combined with LabVIEW, NI myDAQ creates a hands-on learning solution for the core concepts in engineering curricula, including analog circuits, sensors, and signals and systems courses.
What is an NI miniSystem?
The NI miniSystem is an external accessory board that plugs into NI myDAQ and interfaces with real-world sensors and signals to teach solutions to relevant engineering challenges. For example, with the myVTOL for NI myDAQ, students can learn the concepts of PID control and flight dynamics through systems that fit in the palms of their hands.
Requirements:
- Software: LabVIEW Development Software, version 2011 or later
- Hardware: NI myDAQ
Downloads:
Additional Information
- To request a myDyno for NI myDAQ, educators should contact minisystems@ni.com.
- NI myDAQ: visit ni.com/myDAQ.
