Is DASYLab compatible with Yokogawa MW100 Data acquicition system?

[dahleri]

Im using a Yokogawa MW100 DAQ and are intrested in using DASYLab for more trouble free signal presentation. Is DASYLab compatible with Yokogawa products? I've tried to search for Yokogawa drivers but failed.

[CJ_Butler__DASYLab_Pro]

I don't know of a driver for it. But, if you have the Modbus option, DASYLab 12 will support that.

From their web site:

A large data acquisition system of up to 360 channels can be assembled using multiple MW100s and standard MODBUS TCP Ethernet communications. When equipped with the /M1 math option, the MW100 can acquire up to 300 channels of external data from additional MW100 units or other devices such as a PLC using MODBUS TCP communications. This provides a total system capacity of 360 channels (60 built-in measure channels + 300 external). 

Serial MODBUS RTU communications (RS- 232 or RS-422A/485) can be ordered as a separate option with the same capability.

[dahleri]

Thank's CJ.

But how do I know if I have M1 math functions? Is it a built in function or something in my DAQ software?

[CJ_Butler__DASYLab_Pro]

I'm not familiar with the device.

I found that information here: http://www.yokogawa.com/ns/daq/mw100/ns-mw100_01.htm