Repeated system crashes on report

[marine boy]

Whilst generating reports within Diadem 10 my collegues and I have been experiencing repeated system crashes that result in Diadem closing. Most errors seem to occur whilst undertaking simple task such as reformatting axis or changing labels. Below is an extract from the error log which is typical of the problem seen. Any guidance would be appreciated as this is so frequent as to cause real issues with the usability of this software.

Diadem 10 is running on Dell desktops, Pentium 4 2.8Ghz 1GB Ram.

278  11:51:54 Error:
     Error while executing "FORMULACALCI("D2AxisXTick := 0.025")" command
     Error type: ACCESS VIOLATION
     Error address: 0008F2B5
     Module name:gfsdesk.DLL

Thanks

[marine boy]

Please help, fault as occured again!!!!!

13   12:37:13 Error:
     Error while executing "FORMULACALCI("D2AxisXEnd := 0.4999")" command
     Error type: ACCESS VIOLATION
     Error address: 0008F2B5
     Module name:gfsdesk.DLL
14   12:37:13 Error:
     Error while executing "FORMULACALCI("D2AxisXEnd := 0.4999")" command
     Error type: ACCESS VIOLATION
     Error address: 0008F2B5
     Module name:gfsdesk.DLL
15   12:37:16 Error:
     Error while executing "FORMULACALCI("D2AxisXEnd := 0.4999")" command
     Error type: ACCESS VIOLATION
     Error address: 0008F2B5
     Module name:gfsdesk.DLL
16   12:37:16 Error:
     Error while executing "FORMULACALCI("D2AxisXEnd := 0.4999")" command
     Error type: ACCESS VIOLATION
     Error address: 0008F2B5
     Module name:gfsdesk.DLL
17   12:37:19 Error:
     Error while executing "FORMULACALCI("D2AxisXEnd := 0.4999")" command
     Error type: ACCESS VIOLATION
     Error address: 0008F2B5
     Module name:gfsdesk.DLL
18   12:37:19 Error:
     Error while executing "FORMULACALCI("D2AxisXEnd := 0.4999")" command
     Error type: ACCESS VIOLATION
     Error address: 0008F2B5
     Module name:gfsdesk.DLL
19   12:37:21 Error:
     Error while executing "FORMULACALCI("D2AxisXEnd := 0.4999")" command
     Error type: ACCESS VIOLATION
     Error address: 0008F2B5
     Module name:gfsdesk.DLL
20   12:37:21 Error:
     Error while executing "FORMULACALCI("D2AxisXEnd := 0.4999")" command
     Error type: ACCESS VIOLATION
     Error address: 0008F2B5
     Module name:gfsdesk.DLL

[Walter_Rick]

Hi marine boy,

Unfortunately we had a problem in the first DIAdem 10.0 revision with setting specific parameters for 2D axis systems. This was fixed with the service pack 1.
The DIAdem 10.0 SP 1 you can download from the NI-Web for free.

I hope this will help.

Greetings
Walter