Connect I/Os using SCB-100A with PXI-6515

[Steve_21]

Dear all, 

I'm planning to use the PXI-6515 modul with the SCB-100A break out box. I couldn't find a detailed pin out for the SCB-100A except of the picture below. Does someone has a document or a sketch showing how to connect digital inputs as as well digital outputs?

Thanks in advance.

Best,
Steve

[santo_13]

I believe you're using this combination of cable and breakout board.

Please refer to this document for the actual pinouts for 6515 - https://www.ni.com/pdf/manuals/376934a.pdf

[Steve_21]

Hey Santhosh,

thanks for your fast response. The combination is correct. I already found the picture below in a community thread but I'm still confused
1.Whichs ports are digital inputs and which of these are outputs. 

2. Where do I have to connect +24VDC and GND and my Device to control it via digital outputs (I wand to control a relay)
3. Where do I have to connect +24VDC and GND in case of reading a digital inputs signal?

Best,
Stephan

[santo_13]

Description of each pin functionality is provided in the User manual

Here is an example connection provided in the user manual