We will receive a MS8911A instrument and LAbVIEW 8.2 next week . This analyzer support DVB-H and DVB-T standard. So we are going to measure on the field the signal RF level, MER, C/N using this instrument and the corresponding GPS coordinate with GPS receiver. So this is why I need the LabView driver to develop a VI that can get this parameters from the test field. I'll appreciate if you can help me to develop this VI in order to do this measurement on the field....
Again, you posted to the wrong forum. This is the Digital I/O forum and has nothing to do with instrument control. You want your question to end up here.
Message Edited by Dennis Knutson on 01-23-200707:29 AM
