Output Driver of NI-9477

[jenstl]

What is the output driver for the NI-9476 and NI-9477 modules? I need to model it in MultiSim.

[Chris_K_]

The 9477 and 9476, can source up to 1A per channel up to 20A per module, but the current must AAA be provided from an external source. 

Have a look at the manual of the 9477 of 9476 devices

https://www.ni.com/docs/en-US/bundle/ni-9477-getting-started/page/overview.html

https://www.ni.com/docs/en-US/bundle/ni-9476-getting-started/page/overview.html

Check page 8 for a diagram of the configuration

Chris

[jenstl]

I have seen the documentatin and it does not provide sufficient detail. Driving 1A to ground doesn't say much about the output stage, as that could be a relay, transistor, MOS-FET, or something else. I need to know what the output stage is because I need to know what the voltage is when driven low. It is critical to my application. I need to know what the output driver is, by manufacturer and part number. Then I can easily look up all of the perameters I need to know.