Configurable voltage ramp generator with DAQmx

[Guillaume_H]

Overview
The example is to demonstrate how to generate a finite ram signal with a user-defined parameters

Description:
With a defined Analog Output from the user, a ramp signal would be generated with the help of the DAQmx in the waveform
and set by the user with the inquired parameters from the front panel of the VI

Steps to Implement or Execute Code::
To implement this example:

1. Define the Output Physical Channel
2. Set the value of the parameters as needed
3. Run the VI
4. (Optional) Turn on the Highlight Execution to see the flow of the VI

To execute this example:

1. Install the required software.
2. Connect the DAQ hardware that supports the AO features
3. Confirm the connection with the MAX with TestPanel
4. Open the VI and refer the Implement Steps
    
   

Requirements
Software
LabVIEW 2012 or compatible
NI-DAQmx 15.0 or compatible

Hardware
cDAQ with C series Analog Output Module

**This document has been updated to meet the current required format for the NI Code Exchange.**